my homemade go kart part 1 ( frame and steering )
my go kart that i started a while ago, 99% of it is homemade or scrap frame, steering spindles, tie rods, steering shaft the wheels are just wheelbarrow wheels ( i now have 3, need 1 more) part 2 will probably be rear axle, seat, brakes dont know whether to use electric or petrol engine, my budget is very low
Duration : 0:0:56
Categories: go kart frames Tags: drifting, electric, enginering, frame, go, Homemade, in, kart, makeing, petrol, rods, spindles, the, tie
Was a secret project.Categories: Uncategorized Tags: 15, 15a, 250w, 48, 48v, amps, cart, charger, controller, currie, dual, electric, go, kart, motor, project, volts
New and Improved Electric Go-Kart Project
we re-vamped the electric go kart. it now goes faster and looks cooler, now in red!
this a short video of the electric go kart. We started out with a gasoline powered go kart frame/kit, and converted it all to electric then assembled it. it took about 6 weeks, and it still isn’t completely done. It uses a Kelly PWM controller and a MET motor running on 24v.
Duration : 0:2:53
Categories: go kart frames Tags: battery, car, challenge, controller, electric, fun, gasoline, go, GO-KART, gokart, helmet, home, home-made, Homemade, kart, kelly, made, motor, New, powered, vehichle, wheels
Electric Go-Kart Project
this a short video of the electric go kart. We started out with a gasoline powered go kart frame/kit, and converted it all to electric then assembled it. it took about 6 weeks, and it still isn’t completely done. It uses a Kelly PWM controller and a MET motor running on 24v.
Duration : 0:1:25
Categories: go kart frames Tags: car, electric, gasoline, go, GO-KART, home, home-made, Homemade, kart, made, motor, powered, vehichle, wheels
Toby’s electric go kart
This is a movie that shows the components and performance of the electric go kart that I designed and built in my garage.
Duration : 0:4:1
Categories: go kart seat Tags: 48, alltrax, car, cart, controller, electric, etek, ev, go, high-performance, kart, nev, ricco, speed, toby, torque, vehicle, volts
4WD hybrid electric go-kart (4 motors) – Part 1
Four wheel drive petrol / electric hybrid go-kart, Independent adjustable height suspension, home built PWM drive. 4 x 300W 24 volt motors. Petrol motor changes & maintains batteries, drive circuit controls alternator voltage and stops motor stalling under max load.
Just changed to 4 x 1Kw motors, will post an update, really, when starting up the 1kw motors are putting out a lot more (probably 1.5kw), the old 300w motors were putting out more like 500w on start up, got very hot, fine on flat ground but in the mud etc they could burn out (I melted one) just as well the PWM is an overkill. With the 1Kv motors it feels like it will go anywhere and knocks you back in the seat when it takes off. (I will see if it goes anywhere and post the video!)
Video posted: http://www.youtube.com/watch?v=iYR4344zpTw
Duration : 0:2:14
Categories: go kart seat Tags: 36, 4WD, battery, donut, electric, go, GO-KART, GoCart, gokart, Hybrid, kart, motors, petrol-electric, power, PWM, quad, racing, vehicle, volts
48volt Urban Xtreme Go Kart driven by a 4 year old
Liam takes his first ride in his 48volt Urban Xtreme Go kart. With 1000Watts of power the Urban Xtreme Go Kart delivers impressive performance.
To learn more about modifying kid’s ride on vehicles visit www.modifiedpowerwheels.com
Driver: Liam K
Age: 4
Vehicle:
24volt Urban X Go Kart with the following upgrades
-36volt 750Watt Unite Motor Co. MY1020 motor (running at 48volts)
-48volt 1500Watt PWM Speed controller
-Hall Effect variable throttle
-Four 12volt 18ah SLA batteries
-Rear wheels replaced with 26cm pneumatic tires
-Racing seat with 5 point harness
.
.
Duration : 0:1:30
Categories: go kart seat Tags: electric, kart, powerwheels, race, speed, track
Own made electric go kart
This movie shows the components and performance of the electric go kart designed and built in a garage.
Duration : 0:4:1
Categories: cheap go karts Tags: 48, controller, electric, etek, ev, go, high-performance, kart, kartelec, nev, torque, Volt
Comet Torque Converter Electric Go Kart
The drive side didn’t push out the belt completely until the motor was hooked directly to the batteries through relays first through 24 volt and then finally through the 48 volt relay. Go kart has a homemade frame driven by a 36 volt caterpillar motor if anyone recognizes it please tell me the model so I can find the specs. Its controlled by a 36 to 48 volt Curtis controller that just doesn’t have enough umpff to power this large motor it is only used for taking off then I use the relays to accelerate. More videos coming soon.
Duration : 0:0:14
Electric Go Kart frame.mpg
This is the second video of my Electric go kart project. I have changed certain things such as the type of bearings as well as other details. In my future videos I will explain this.
Duration : 0:1:25
Categories: kart frames Tags: electric, go, kart, project