Karts to Go» frame

How to build a go Kart

admin — Sat, 10 Apr 2010 04:22:10 +0000

Part one of the go kart build i still need to do the steering and some other little tweaks

Duration : 0:6:3

Technorati Tags: bolts, Brakes, build, Building, Built, cars, cart, Clucth, frame, go, home, Homemade, honda, kart, motor, speed, tires, wheels

Go Kart Building Part 5…Frame Fabrication…

admin — Tue, 10 Mar 2009 13:35:59 +0000

The Go Kart Guru welds a frame together…excerpts from the Go Kart Video…GoKartGuru.com

Duration : 0:2:8

Technorati Tags: build, frame, go, how, kart, make, to, video

my homemade go kart part 1 ( frame and steering )

admin — Tue, 10 Mar 2009 03:38:21 +0000

my go kart that i started a while ago, 99% of it is homemade or scrap frame, steering spindles, tie rods, steering shaft the wheels are just wheelbarrow wheels ( i now have 3, need 1 more) part 2 will probably be rear axle, seat, brakes dont know whether to use electric or petrol engine, my budget is very low

Duration : 0:0:56

Technorati Tags: drifting, electric, enginering, frame, go, Homemade, in, kart, makeing, petrol, rods, spindles, the, tie

Go Kart Build Update Part 2

admin — Sat, 31 Jan 2009 06:00:59 +0000

Got the frame built and the rear wheels mounted. Next ill probably work on the steering and rear sprocket.

Duration : 0:8:26

Technorati Tags: 5hp, build, cart, frame, gas, go, homade, honada, kart, metal, motorized, outlaw662sr, part, snow, steering, wheels

My go kart before and after..slideshow vid

admin — Sun, 04 Jan 2009 06:00:59 +0000

I just recently finished painting my go kart. Ive been working on it since 2005/2006 when I bought the frame. Ive done some mods and im currently buying parts for the engine to get more hp out of it.

Enjoy..

Duration : 0:2:28

Technorati Tags: auto, BRIGGS, frame, go, honda, jujujus2, kart.cart, motor, paint, project, sport, spray

Go Kart sanding and frame prep!

admin — Mon, 10 Oct 2011 18:14:04 +0000

This is one of the go kart frames that I am preparing at the moment. I used the grinder with a twisted metal wire cup to remove all the rust and old paint. I removed all of the paint and smooth sanded the frame with the air die grinder and a medium sanding wheel. I used rust remover, primed, and painted the frame. This is just a small clip of the paint removal process.

Duration : 0:0:57

Technorati Tags: build, cart, frame, go, go-cart, GO-KART, kart, paint, preparation, sand

Go kart build part 1

admin — Tue, 06 Sep 2011 11:06:04 +0000

This is my Go kart which is in the process of being built. On this video you see me using my Gasless welder, welding bits of the frame. There will be more video’s on my go kart and you will slowly see it starting to take shape.

Duration : 0:3:24

Technorati Tags: Fluxcore, frame, Gasless, go, kart, metal, MIG, project, welding

home made go kart frame

admin — Wed, 31 Aug 2011 17:20:07 +0000

me and my friends been building this go kart. its looking sort of rough now but the seat needs to be covered and painted but looks pretty good for mostly home made

Duration : 0:1:34

Technorati Tags: frame, go, home, kart, made

12 Horsepower Monster Rear Engine Home made Street Go Kart testing part 1

admin — Sat, 27 Aug 2011 13:44:08 +0000

This video is a collection of clips that were shot during the building and testing of our street kart. Most of the parts were donated or scavenged. It was built for under $100.
-The frame was made of scavenged galvanized water pipe (extremely heavy)
-Engine is a 12 Hp cast iron Briggs and Stratton with an aluminum piston and a massive flywheel.
-Paint color is Krylon safety blue
-Tires were donated.
-Fastest Lap around Driveway held by Jeff at 7.8 seconds
Only parts bought were tie rods,bearings, axle, brakes and steering wheel.
It was configured to run with either the centrifugal clutch, or a direct drive belt system that you could push start like a sprint car. The engine weighs so much that when combined with rider and frame it was nearly 500 lbs. It handled very well. In the direct drive configuration the power from the massive engine would cause the front end to jump forward with every piston stroke. The whole thing sat about an inch and a half off the ground causing some interesting sparks going up and down driveways. Future upgrades include front suspension, 3 speed gearbox and a lightened box tube frame.
If you have any questions or comments feel free to respond. Enjoy

Duration : 0:3:46

Technorati Tags: BRIGGS, cart, carting, circle, driveway, ENGINE, engineering, frame, go, heat, helmet, holley, Homemade, kart, karting, nascar, offroad, outtakes, qualify, race, racing, rider, safety, slicks, software, speedway, sponsor, stratton, testing, track

go kart frame update

admin — Wed, 17 Aug 2011 07:51:20 +0000

an update on preparing the go kart for paint!

Duration : 0:3:34

Technorati Tags: frame, GO-KART, grinding, paint, project